GALVANIZED WASTE CONTAINER Damper Lid 1100 Liter

GALVANIZED WASTE CONTAINER Damper Lid 1100 Liter
Body 2.00 mm. It is formed by bending and pressing as a single piece of sheet metal and its strength is increased. The base has corners and the upper posterior rim is radiused. The assembly of the side sheets made of the same sheet with the body sheet, at least 15.00 mm. wide bent protrusion or lip including all perimeters and radii, with this protrusion, side sheets and body sheet, including external radii, are joined seamlessly by welding.
The body welding and other welds are made by using the gas metal arc technique, without slag, by continuous boiling and the body is watertight.
Lifting arms suitable for the lifting apparatus on the vehicle were drilled from 4.00 mm sheet metal in 45x10 cm size, and the 16.00 mm round arm was welded to the sheet metal from the top and bottom, and the sheet metal was welded to the body.
Container lid 1.50 mm. It is manufactured from sheet metal in the form of a cover system that can be opened around its own axis. The cover is in one piece and has an opening handle, stop and lock system. In addition, there are internal strength-enhancing profile reinforcements on the cover.
Body mouth 25.00x50.00x2.00 mm. It has been turned by bending the body and side sheets in size. Except for the corner joint, there is no weld in the mouth. The bottom part of the profile is method welded.
Carrier 4 pieces 160x45 mm. in size, wide tongs, 360 degree rotating, tongs 4.00 mm. There are wheels that comply with the TS EN 12532 standard. The wheel connection foot plate is 4.00 mm.
The inside and outside of the container, including the cover, are galvanized in accordance with TS EN ISO 1461 standard with a complete Hot Dip Galvanizing system.
The name of the municipality, the figure of the person throwing garbage and the slogan 'Let's Keep Our Environment Clean' are written on the front surface.
The container has TS EN 840-3 Standard Conformity Certificate.